This resume is a sample for the post of Senior Electrical Engineer / Electronic Mechanical Engineer Resume. This type of job requires a higher level of expertise. A Senior Electrical Engineer not only requires technical skills but also keeps check and balance, manages, monitors, and motivates his subordinates. The employer would want to hire an employee of a higher caliber. So your engineer resume must bring about that you truly deserve this job. A good and experienced Electrical Engineer not only manages all machinery apprehensively but also reduces the usage of electricity, resulting in saving a lot of energy and money which is incurred in case of repair and maintenance. So for this type of prime opportunity, you are required a brief, proper, and sound resume that should reflect your abilities and capacities. How do you construct a good resume? Below we have given a satisfactory sample of your resume that should help you in building a right and prompt impression on the employer. Adding images(if any) and references of your previous encounters also adds to the credibility of your Electronic Mechanical Engineer Resume
Electronic Mechanical Engineer Resume Sample
Name: XYZ
Place: IAL Madar Building, 31st Street King Faisal Road, Sharjah, United Arab Emirates
Passport No.
Mobile:
E-mail:
Birth date:
Nationality:
JOB OBJECTIVE
A position in mechanical and/or electrical engineering that will require my best effort.
SUMMARY OF QUALIFICATIONS
- Over 20 years of experience in operation and maintenance, construction, and installation of big industrial, chemical plant and commercial buildings, Malls, and Power and Desalination Plant, works as a mechanical and electrical engineer in the Philippines, Kingdom of Saudi Arabia. United Arab Emirates and Afghanistan.
- BS Mechanical and Electrical Engineering granted by the Far East and Technological Institute (FEATI) University in Sta.Cruz, Manila, Philippines from 1970-80.
- Highly motivated, result-oriented, a team player but can work independently with minimal supervision.
PROFESSIONAL EMPLOYMENT
May 5, 2013 – Aug. 31,2014
Sacre Davey Middle East LLC.
Engineering Consultant & Management.
Electrical & Mechanical Engineer Abu Dhabi, U.A.E.
Responsibilities:
- Project Site –Gulf Fluor LLC
- ICAD-2 Mushaffa, Abu Dhabi UAE
- Inspection of all electrical & mechanical
- Works related to free commissioning.
- Motor solo run test, check current, rpm, voltage
- vibration, bearing temperature, etc.
- Perform commissioning @ BTC and WWTP areas.
- Checking performance and operational tests
- for the sequence of interlocking.
- Perform SOP for free commissioning & commissioning
- Knowledge of electrical and mechanical design.Nov. 27, 2011 to April 4, 2013
Al Reyami Electroical Mechanical Works LLC, Dubai, UAE.
Site Engineer/Estimation Engineer
Responsibilities:
- Installation of Chiller, FCU, Fire Alarm & F.F System.
- Electrical control & equipment. etc.
- MEP estimation and design.
- Testing & Commissioning of Electrical.
- Mechanical equipment and interlocking.
- Implementing safety measures to avoid serious accidents.
Sodexo Intl. Kandahar, U.S Military Air Base, Afghanistan.
Executive Electronic Mechanical Engineer.
Responsibilities:
- Operation and maintenance of big
- Dining Facilities and Management.
- Directing work orders to my staff.
- Planning and scheduling of preventive and corrective maintenance
- Evaluating staff technical ability and performance.
- Planning and organizing new technical modifications.
- Coordinating with fellow staff which is all related to maintenance issues.
- MGT Group of Company Kandahar,
Assistant Electronic Mechanical Engineer.
July 1, 2010 to Dec. 23, 2010
Afghanistan U.S Military Base
Engineer
- MEP Design and Estimator
- Preparing of BOQ
- Preparing of Electrical and Mechanical load schedule
- Checking and calculating of pump size and motor requirement.
- Testing and Commissioning of Generator and HVAC.
July 2, 2009 to July 1, 2010
Ras Engineering LLC/Nakheel Project,
Jumierah Island Dubai, UAE
Site Electronic Mechanical Engineer.
- Planning and scheduling of preventive & corrective maintenance
- Preparing daily and monthly technical reports.
- Preparing monthly man-hour calculations.
- Modification of existing design to improve efficiency
- Installation of additional load and power.
- Preparing monthly water and power consumption.
- Supervised all additional electrical and mechanical works.
- Monitoring of all pumping station control and PLC panels.
Electronic Mechanical Engineer.
Sept. 2008 to Feb. 2009
Jumal Al Majid Establishment ( Dubai Mall Project )
Dubai, United Arab Emirates.
Supervised the construction of electromagnetic works.
- Provided technical assistance as an Electrical Mechanical Engineer for the Construction of Dubai Mall.
- Estimated and specified construction materials required for installation.
- Calculated load and wire sizes per NEC Code requirements.
- Directed the installation of electrical wiring, conduit, electrical fixtures, and underground cable.
- Implementing safety measures in construction sites to all of our personnel to avoid and prevent accidents.
- Testing and commissioning of electrical and mechanical equipment.
- Supervised the maintenance, repair, and replacement of electrical devices such as breakers, transformers, starters, motors, relays, and timers.
- Monitored electrical meters, equipment, and machinery
- Performed preventive and corrective maintenance.
- Physical checks on an electrical system if there is no sign of danger.
- Responded to work orders and safety inspection reports.
Electrical Mechanical Engineer.
May 2008 to Sept, 2008.
Phoenix Décor/Emirates Interior
Sharjah, United Arab Emirates
- Estimated and specified construction materials required for installation.
- Calculated load and wire sizes per NEC Code requirements.
- Prepared the Bill of Quantities and Total Project Cost
- Directed the installation of electrical wiring, conduit, electrical fixtures, and underground cable.
- Testing and commissioning of electrical and mechanical equipment.
- Supervised the installation of mechanical equipment.
- Responded to work orders and safety inspection reports.
Electrical/Mechanical Estimator.
Nov. 2007 to April 2008.
Power Mechanical Electrical-Mechanical Services L.L.C.
Dubai, United Arab Emirates
- Estimated and specified construction materials required for installation.
- Calculated load and wire sizes per NEC Code requirements.
- Prepared the Bill of Quantities and Total Project Cost.
Electrical Engineer.
Mar. 2006 to Nov. 2007
Saudi Bin Ladin Group of Companies/ SCECO Gizan Farasan Island Diesel Power PlantGizan, Kingdom of Saudi Arabia
- Monitored Programmable Logic Controller (PLC) in the Control Room to ensure the good condition of all plant auxiliaries.
- Supervised and monitored to ensure the smooth operation and maintenance of a Diesel Power Plant with a rating capacity of 6 x 5.5 megawatts power.
- Supervised the effective and efficient use of rotating equipment and machinery, especially plant auxiliaries.
- Troubleshoot abnormal conditions and prevent machine major breakdown.
- Monitored to ensure that the instrument automation system was working normally and automatically.
Recorded the activities concerning preventive and Corrective maintenance for future reference.
Performed calibration and testing of different instruments.
Electrical Engineer
Feb. 2004 to Feb. 2006.
Ministry of Agriculture and Water
Riyadh, Kingdom of Saudi Arabia
- Operated and maintained high voltage motor rated @ 1,400 kW/4160 volts coupled with pump with a discharge capacity of 1,100m3 per hr.
- Performed preventive and corrective maintenance of all electrical and mechanical equipment such as HV switch gear, oil and SF6 circuit breaker, isolator, disconnected switch, motors, UPS, rectifier, AC unit, air handling unit, and pumps.
- Supervised the repair and overhauling of big pumps and the alignment of pumps and motors.
- Conduct routine visual inspection and check for any abnormal conditions either exceptionally high noise levels, abnormal vibrations, or water leaks over and above the standard.
- Supervised to ensure that the plant is in serviceable condition.
Sole Proprietor / Businessman
Dec. 1998 to Dec. 2004
Aqua Farming, Restaurant and Bakery
Malolos, Bulacan, Philippines
- Financed and managed aqua farming, bakery, and restaurant in Malolos, Bulacan, Philippines
- Marketing of products and services
Electro-Mechanical Engineer
Apr. 1996 to Sept. 1998
Saudi Building Technical Maintenance/King Fahd International Stadium
Riyadh, Kingdom of Saudi Arabia
- Provided technical assistance as a mechanical Maintenance Engineer for the smooth operation of Riyadh International Stadium and Royal Pavilion.
- Estimated and specified construction materials required for additional installation.
- Calculated load and wire sizes per NEC Code requirements.
- Directed the installation of electrical wiring, conduit, electrical fixtures, and underground cable.
- Testing and commissioning of electrical and mechanical equipment.
- Supervised the maintenance, repair, and replacement of electrical devices such as breaker panels, transformers, starters, motors, relays, timers, alarm and signal devices, and distribution circuits.
- Monitored electrical equipment meters and testers, tools, and machinery.
- Performed preventive and corrective maintenance and physical checks on an electrical system.
- Responded to work orders and safety inspection reports.
Electrical Engineer
Dec.1993 to Dec. 1995
Badrah Saudi Factory
Jeddah, Kingdom of Saudi Arabia
- Managed and supervised the industrial plant operations.
- Performed daily routine running maintenance of all equipment and machinery to prevent major machine breakdown
Educational Employment:
Sta.Cruz, Manila, Philippines Far East, and Technological Institute (FEATI) University
Associate Electrical Engineering (1979)
Far East and Technological Institute (FEATI) University
Sta.Cruz, Manila, Philippines
BS Mechanical Engineering (1978)
Far East and Technological Institute (FEATI) University
Sta.Cruz, Manila, Philippines Mechanical and Plumbing Fire Sprinkler (56 hrs)
King Abdul Aziz International Airport
Low Voltage Electrical Course Seminar (56 hrs)
King Abdul Aziz International Airport
Computer DGP and DCP Course Seminar (56 hrs)
Safety Course Seminar (56 hrs)
King Abdul Aziz International Airport
In-Service Supervisory Training (240 hrs)
Cosmos Bottling Corporation, Philippines
SPECIAL SKILLS
- Welding/Fabricating
- Operating Xerox/Fax Machines
- Driving
PERSONAL
Filipino, 50 years old, Roman Catholic, married with 4 daughters, good health, willing to be relocated and/or travel extensively.
CHARACTER REFERENCE
(Available upon request)