Home » Electric Resume » Electric Instrument Technician Resume Sample

Electric Instrument Technician Resume Sample

This resume is a sample for the post of Electric Instrument Technician. This type of job requires higher level of expertise. A Electric Instrument Technician not only requires technical skills but he also keeps check and balance, manages, monitors and motivates his subordinates. The employer would want to hire an employee of higher caliber. So your resume must bring about that your truly deserves this job. A good and experienced Electric Instrument Technician not only manages all machinery apprehensively but also reduces the usage of electricity, resulting in  saving a lot of energy and money which is incurred in case of repair and maintenance. So for this type of prime opportunity you are required a brief, proper and sound resume which should persist about your abilities and capacities. How you construct a good resume? Below we have given a satisfactory sample of resume that should help you in building a right and prompt impression on the employer. Adding images(if any) and references of your previous encounters also adds to the credibility of your resume. Like Electrical Resume


 Electric Instrument Technician Resume Sample


Name: xyz

Passport No.000

Mobile: 000

E-mail:xxx

JOB OBJECTIVE:(Electric Instrument Technician)

A position in mechanical and/or electrical engineering that will require my best effort. A good and experienced Electric Instrument Technician not only manages all machinery apprehensively but also reduces the usage of electricity, resulting in  saving a lot of energy and money which is incurred in case of repair and maintenance.

 SUMMARY OF QUALIFICATIONS:(Electric Instrument Technician)

  • Over 20 years of experience in operation and maintenance, construction, installation of big industrial, chemical plant and commercial buildings, Mall, Power and Desalination Plant, works as mechanical and electrical engineer in the Philippines, Kingdom of Saudi Arabia. United Arab Emirates and Afghanistan.
  • BS Mechanical and Electrical Engineering granted by the Far East and Technological Institute (FEATI) University in Sta.Cruz, Manila, Philippines from 1970-80.
  • Highly motivated, result-oriented, a team player but can work independently with minimal supervision.

PROFESSIONAL EMPLOYMENT

Electric Instrument Technician

Abu Dhabi, UAE

Perform commissioning @ BTC and WWTP area.

Checking performance and operational test  for the sequence of interlocking.

Perform   SOP  for free commissioning & commissioning Knowledge in electrical and   mechanical  design.

Site Electric Instrument Technician

Electrical control & equipment. etc.

MEP estimation and design.

Testing & Commissioning of Electro

Mechanical equipment and interlocking.

Implementing safety measure to avoid serious accident.

 Electric Maintenance Manager

Operation and maintenance of big Dining   Facilities  and  Management.

. Directing   work   order  to my staff.

.  Planning and scheduling of preventive and corrective maintenance

.  Evaluating   staff technical  ability and performance.

.  Planning and organizing new technical modification.

. Coordinating to fellow staff which  all related to maintenance issue.

 Electrical & Mechanical Instroment Engineer

.   MEP Design and Estimator

.   Preparing   of BOQ

.   Preparing    of Electrical and Mechanical load schedule

.   Checking and calculating of pump size and motor requirement.

.    Testing and Commissioning of Generator and HVAC.

Feb. 2003 to Feb. 2005 Ministry of Agriculture and Water.

  • Performed preventive and corrective maintenance of all electrical and mechanical equipment such as HV switch gear, oil and SF6 circuit breaker, isolator, disconnected switch, motors, UPS, rectifier, AC unit, air handling unit and pumps.
  • Supervised the repair and overhauling of big pumps and alignment of pump and motors.
  • Conduct routine visual inspection and check for any abnormal condition either exceptionally high noise level, abnormal vibrations, water leaks over and above the standard.
  • Supervised to ensure that the plant is in serviceable condition.
Electric Instrument Technician  
Feb.1986 to Jan.1991 Saline Water Conversion Corporation.

  • Provided technical assistance for combined power and desalination plant dealing with high voltages 132KV.
  • Monitored Programmable Logic Controller (PLC) at Control Room to ensure the good condition of plant auxiliaries and other equipment.
  • Supervised and monitor to ensure the smooth operation and maintenance of Steam Power Plant with rating capacity of 10 x 150 mega watts power .
  • Supervised the effective and efficient use of rotating equipment and machinery especially plant auxiliaries.
  • Troubleshoot abnormal condition and prevent machine major breakdown.
  • Monitored to ensure that the instrument automation system is working normally and automatically.
  • Recorded the activities concerning preventive and corrective maintenance for future reference.
Electrical Technician
April 1981 to July 1985 King Abdul Aziz International Airport.

  • As a Fire Alarm Technician, performed troubleshooting and maintenance of fire alarm system such as smoke detectors, ultra violet detectors, heat detectors, carbon monoxide, foam and deluge and sprinkler system
  • As Instrument Technician, performed troubleshooting and maintenance of pneumatic control equipment, various thermostats, motorized dampers, positioned, timers, water level controls, air handling unit controls and automatic door controls, among others
  • Performed calibration of pressure and temperature gauge plus other instruments
Electrical and Instrument Technician
May 1977 to March 1981 Cosmos Bottling Corporation.

  • Supervised and performed the operation and maintenance of all bottling equipment and machinery
  • Managed the operation of ammonia and air compressor, washer, centrifugal pumps, boilers, evaporation condense, filler machine, case packer machine and crown-er machine
  • Performed preventive maintenance in accordance to set standard
  • Planned and scheduled the machine shut down for corrective check-up
Plant Maintenance Foreman

Qualification:

BS Electrical Engineering

Associate Electrical Engineering

SPECIAL SKILLS:

  1. Welding/Fabricating
  2. Operating Xerox/Fax Machines
  3. Driving