Home » Electric Resume » Electrical/Mechanical/ Welder Engineer Resume Sample

Electrical/Mechanical/ Welder Engineer Resume Sample

This resume is a sample for the post of Electrical/Mechanical/ Welder Engineer. This type of job requires higher level of expertise. A Electrical/Mechanical/ Welder Engineer not only requires technical skills but he also keeps check and balance, manages, monitors and motivates his subordinates. The employer would want to hire an employee of higher caliber. So your resume must bring about that your truly deserves this job. A good and experienced Electrical Engineer not only manages all machinery apprehensively but also reduces the usage of electricity, resulting in  saving a lot of energy and money which is incurred in case of repair and maintenance. So for this type of prime opportunity you are required a brief, proper and sound resume which should persist about your abilities and capacities. How you construct a good resume? Below we have given a satisfactory sample of resume that should help you in building a right and prompt impression on the employer. Adding images(if any) and references of your previous encounters also adds to the credibility of your {Electrical/Mechanical/ Welder} resume.


Electrical/Mechanical/ Welder Engineer Resume Sample


 Name: XYZ

Passport No.000

Mobile No: 0000

E-mail: xxxxx

JOB OBJECTIVE:(Chief Electric/Mechanical Engineer)

A position in Chief mechanical and/or electrical engineering that will require my best effort.

 SUMMARY OF QUALIFICATIONS (Chief Electric/Mechanical Engineer)

  • Over 20 years of experience in operation and maintenance, construction, installation of big industrial, chemical plant and commercial buildings, Mall, Power and Desalination Plant, works as mechanical and electrical engineer in the Philippines, Kingdom of Saudi Arabia. United Arab Emirates and Afghanistan.
  • BS Mechanical and Electrical Engineering granted by the Far East and Technological Institute (FEATI) University in Sta.Cruz, Manila, Philippines from 1970-80.
  • Highly motivated, result-oriented, a team player but can work independently with minimal supervision.

PROFESSIONAL EMPLOYMENT:

Perform   SOP  for free commissioning & commissioning

Knowledge in electrical and   mechanical  design.

ABC Electro Mechanical Works LLC       Chief Electric/Mechanical Engineer

Installation  of Chiller, FCU, Fire Alarm & F.F System.

Electrical control & equipment. etc.

MEP estimation and design.

Testing & Commissioning of Electro

Mechanical equipment and interlocking.

Implementing safety measure to avoid serious accident.

Maintenance Manager

Kandahar,  U.S Military   Air Base Pakistan.

Operation and maintenance of big

Dining   Facilities  and  Management.

. Directing   work   order  to my staff.

.  Planning and scheduling of preventive and corrective maintenance

.  Evaluating   staff technical  ability and performance.

.  Planning and organizing new technical modification.

. Coordinating to fellow staff which  all related to maintenance issue.

MGT Group of Company Kandahar,

Electrical & Mechanical

Afghanistan U.S Military Base

.   MEP Design and Estimator

.   Preparing   of BOQ

.   Preparing    of Electrical and Mechanical load schedule

.   Checking and calculating of pump size and motor requirement.

.    Testing and Commissioning of Generator and HVAC.

ABC Engineering LLC / Nakheel   Project

Jumierah  Island  Dubai, UAE                       Site Engineer

.  Planning and scheduling of preventive & corrective maintenance

.  Preparing   daily  and monthly technical report.

.  Preparing   monthly  man hour calculation.

 .  Modification of existing design to improve efficiency.

.   Installation of additional load and power.

.   Preparing monthly water and power consumption.

.  Supervised all additional electrical and mechanical works.

.  Monitoring of all pumping station control and PLC panel.

Sept. 2008 to Feb.  2009 Jumal Al Majid Establishment ( Dubai Mall Project )Dubai, United Arab Emirates .    Supervised the construction of electromechanical works.

  • Provided technical assistance as Electro Mechanical Engineer for the Construction of Dubai Mall.
  • Estimated and specified construction materials required for installation.
  • Calculated load and wires sizes per NEC Code requirements.
  • Directed the installation of electrical wiring, conduit, electrical fixtures and underground cable.
  • Implementing safety measure in construction site to all of our personnel to avoid and prevent accident.
  • Testing and commissioning of electrical and mechanical equipment.
  • Supervised the maintenance, repair and replacement of electrical devices such as breaker, transformers, starters, motors, relays, timers.
  • Monitored electrical meters, equipment and machinery
  • Performed preventive and corrective maintenance.
  • Physical checks on electrical system if there is no sign of danger.
  • Responded to work orders and safety inspection reports.
Elector Mechanical  Engineer
May 2008 to Sept. 2008 Phoenix Decor/Emirates Interior 

  • Estimated and specified construction materials required for installation
  • Calculated load and wires sizes per NEC Code requirements
  • Prepared the Bill of Quantities and Total Project Cost
  • Directed the installation of electrical wiring, conduit, electrical fixtures and underground cable.
  • Testing and commissioning of electrical and mechanical equipment.
  • Supervised the installation of mechanical equipment.
  • Responded to work orders and safety inspection reports.
Elector Mechanical Engineer
Nov. 2007 to April 2008 Power Mechanical Electro-Mechanical Services  

  • Estimated and specified construction materials required for installation.
  • Calculated load and wires sizes per NEC Code requirements.
  • Prepared the Bill of Quantities and Total Project Cost.
Electrical/Mechanical Estimator
Mar. 2006 to Nov. 2007 Saudi Bin Ladin Group of Companies/ SCECO Gizan Farasan Island Diesel Power Plant.

  • Monitored Programmable Logic Controller (PLC) at Control Room to ensure the good condition of all plant auxiliaries.
  • Supervised and monitor to ensure the smooth operation and maintenance of Diesel Power Plant with rating capacity of 6 x 5.5 mega watts power.
  • Supervised the effective and efficient use of rotating equipment and machinery especially plant auxiliaries.
  • Troubleshoot abnormal condition and prevent machine major breakdown.
  • Monitored to ensure that the instrument automation system is working normally and automatically.

Recorded the activities concerning preventive and

Corrective maintenance for future reference.

Performed calibration and testing of different instrument.

  • Electrical Engineer
Feb. 2004 to Feb. 2006 Ministry of Agriculture and Water.

  • Operated and maintained high voltage motor rated @ 1,400 kw/4160 volts coupled with pump with a discharge capacity of 1,100m3 per hr.
  • Performed preventive and corrective maintenance of all electrical and mechanical equipment such as HV switch gear, oil and SF6 circuit breaker, isolator, disconnected switch, motors, UPS, rectifier, AC unit, air handling unit and pumps.
  • Supervised the repair and overhauling of big pumps and alignment of pump and motors.
  • Conduct routine visual inspection and check for any abnormal condition either exceptionally high noise level, abnormal vibrations, water leaks over and above the standard.
  • Supervised to ensure that the plant is in serviceable condition.
Electrical Engineer  
Dec. 1998 to Dec. 2004 Aqua Farming, Restaurant and Bakery.

  • Financed and managed aqua farming, bakery and restaurant in Malolos, Bulacan, Philippines
  • Marketing of products and services
Sole Proprietor / Businessman
Apr. 1996 to Sept. 1998 Saudi Building Technical Maintenance/King Fahd International Stadium                             

  • Provided technical assistance as Electro Mechanical Maintenance Engineer for the smooth operation of Riyadh International Stadium and Royal Pavilion.
  • Estimated and specified construction materials required for additional installation.
  • Calculated load and wires sizes per NEC Code requirements.
  • Directed the installation of electrical wiring, conduit, electrical fixtures and underground cable.
  • Testing and commissioning of electrical and mechanical equipment.
  • Supervised the maintenance, repair and replacement of electrical devices such as breaker panels, transformers, starters, motors, relays, timers, alarm and signal devices and distribution circuits.
  • Monitored electrical equipment meters and testers, tools and machinery.
  • Performed preventive and corrective maintenance and physical checks on electrical system.
  • Responded to work orders and safety inspection reports.
Elector-Mechanical Engineer
Dec.1993 to Dec. 1995 Badrah Saudi Factory.

  • Managed and supervised the industrial plant operations.
  • Performed daily routine running maintenance of all equipment and machinery to prevent major machine breakdown
Electrical Engineer
Feb.1986 to Jan.1991 Saline Water Conversion Corporation.

  • Provided technical assistance for combined power and desalination plant dealing with high voltages 132KV.
  • Monitored Programmable Logic Controller (PLC) at Control Room to ensure the good condition of plant auxiliaries and other equipment.
  • Supervised and monitor to ensure the smooth operation and maintenance of Steam Power Plant with rating capacity of 10 x 150 mega watts power .
  • Supervised the effective and efficient use of rotating equipment and machinery especially plant auxiliaries.
  • Troubleshoot abnormal condition and prevent machine major breakdown.
  • Monitored to ensure that the instrument automation system is working normally and automatically.
  • Recorded the activities concerning preventive and corrective maintenance for future reference.
Electrical Technician
April 1981 to July 1985 King Abdul Aziz International Airport/Dallah Avco.

  • As a Fire Alarm Technician, performed troubleshooting and maintenance of fire alarm system such as smoke detectors, ultra violet detectors, heat detectors, carbon monoxide, foam and deluge and sprinkler system
  • As Instrument Technician, performed troubleshooting and maintenance of pneumatic control equipment, various thermostats, motorized dampers, positioned, timers, water level controls, air handling unit controls and automatic door controls, among others
  • Performed calibration of pressure and temperature gauge plus other instruments
Electrical and Instrument Technician
May 1977 to March 1981 Cosmos Bottling Corporation.

  • Supervised and performed the operation and maintenance of all bottling equipment and machinery
  • Managed the operation of ammonia and air compressor, washer, centrifugal pumps, boilers, evaporation condense, filler machine, case packer machine and crown-er machine
  • Performed preventive maintenance in accordance to set standard
  • Planned and scheduled the machine shut down for corrective check-up
Plant Maintenance Foreman

BS Electrical Engineering

Far East and Technological Institute (FEATI) University

Sta.Cruz, Manila, Philippines

 Associate Electrical Engineering

Far East and Technological Institute (FEATI) University

Sta.Cruz, Manila, Philippines

BS Mechanical Engineering 

Far East and Technological Institute (FEATI) University

Sta.Cruz, Manila, Philippines

Mechanical and Plumbing Fire Sprinkler (56 hrs)

King Abdul Aziz International Airport

Fire Protection Course Seminar (56 hrs)

King Abdul Aziz International Airport

Low Voltage Electrical Course Seminar (56 hrs)

King Abdul Aziz International Airport

Computer DGP and DCP Course Seminar (56 hrs)

Safety Course Seminar (56 hrs)

King Abdul Aziz International Airport

In-Service Supervisory Training (240 hrs)

Cosmos Bottling Corporation, Philippines

Safety Training Program (200 hrs)

Cosmos Bottling Corporation, Philippines

Skills Development Program (240 hrs)

Cosmos Bottling Corporation, Philippines

SPECIAL SKILLS

  1. Welding/Fabricating
  2. Operating Xerox/Fax Machines
  3. Driving