Home » Air Aviation Resume » Aircraft Mechanic Resume Sample

Aircraft Mechanic Resume Sample

Every job related to Airways let it be for an aircraft or of an airport needs meticulous and undivided attention. Before the flight it is an Aircraft Mechanic’s job to make sure if the plane/craft is ready for the flight. It is on his responsibility and authenticity that an aircraft takes off. He monitor the aircraft/aeroplane and inspects the engine for any minor malfunctioning. (See more on Aviation Technician Resume Sample) Hence an Aircraft Mechanic deals with the delicate yet crucial job of handling, maintaining and working of an aircraft. (You can see more on Air Aviation Management Resume Sample here)

Following resume is a sample for the post of an Aircraft Mechanic. The resume for this job needs to be as precise and carefully made as the job itself is. The employer would want to hire an employee with some experience. And if you are an amateur make sure to entail all your experience through out the training camp and academy. See Fresh Aircraft Technician Resume Sample for more ideas and tips. Your resume must show your passion and untiring nature towards taking responsibility. It must entail your expertise as well as your interest in this field. Finally add some references/rewards/credits from your previous experiences. It is definitely going to distinguish your resume among others.

Name:

Address:                                           (Paste your Pic here)

Cell No.:

E-mail Id:

Skype Id:

Gender:

Country:

Career Objective:

To develop and improve my capabilities as an effective and efficient employee and to be able to work in prestigious company where there is career advancement.

Educational Attainment:

Associate in Aircraft Maintenance Technology

PHILIPPINES STATE COLLEGE OF AERONAUTICS

Abc, Philippines

2002-2005

Professional Experience:

SENIOR MECHANIC

OMNI AVIATION CORPORATION (FLYING SCHOOL)

Omni Aviation Complex Manuel A. Roxas Highway Clark Field

Angeles City, Pampanga, Philippines

Duties &Responsibilities

  • Reports to the Quality Assurance Manager

  • Assemble Aircraft in accordance with Service Maintenance Manual.

  • Rigging Aircraft Controls in accordance with Service Maintenance Manual.

  • Perform top overhaul in accordance with Service Maintenance Manual.

  • Perform Pre-flight inspection and engine run-up of all aircraft in accordance with maintenance service manual.

  • Perform structural repair on fuselage, wings and cabin.

  • Perform 25, 50, 75 & 100 hours inspection and annual inspection in accordance with maintenance service manual and recurrent airworthiness directives

  • Troubleshoot and repair engine discrepancies in accordance with maintenance service manual.

  • Perform sheet metal repair metal repair in the airframe of all aircraft.

  • Refueling and servicing of aviation oil in all aircraft.

  • Servicing of main landing gear and nose wheel of all aircraft.

AIRCRAFT MECHANIC A

OMNI AVIATION CORPORATION (FLYING SCHOOL)

Omni Aviation Complex Manuel A. Roxas Highway Clark Field

Angeles City, Pampanga, Philippines

January 2011 to May 2011

Duties &Responsibilities

  • Rated for Cessna 152 & 172 initial & recurrence training. Capable to certify the aircraft returned to service

  • Assemble Aircraft in accordance with Service Maintenance Manual.

  • Rigging Aircraft Controls in accordance with Service Maintenance Manual.

  • Perform top overhaul in accordance with Service Maintenance Manual.

  • Perform Pre-flight inspection and engine run-up of all aircraft in accordance with maintenance service manual.

  • Perform structural repair on fuselage, wings and cabin.

  • Perform 25, 50, 75 & 100 hours inspection and annual inspection in accordance with maintenance service manual and recurrent airworthiness directives.

  • Troubleshoot and repair engine discrepancies in accordance with maintenance service manual.

  • Perform sheet metal repair metal repair in the airframe of all aircraft.

  • Refueling and servicing of aviation oil in all aircraft.

  • Servicing of main landing gear and nose wheel of all aircraft.

  • Marshaling of all aircraft

                              AIRCRAFT MECHANIC

OMNI AVIATION CORPORATION (FLYING SCHOOL)

Omni Aviation Complex Manuel A. Roxas Highway Clark Field

Angeles City, Pampanga, Philippines

March 13, 2008 to June 201

Duties &Responsibilities

  • Assist in Aircraft assembly in accordance with Service Maintenance Manual.

  • Assist in Aircraft Rigging Controls in accordance with Service Maintenance Manual.

  • Perform Pre-flight inspection and engine run-up of all aircraft in accordance with maintenance service manual.

  • Perform structural repair on fuselage, wings and cabin.

  • Perform 25, 50, 75 & 100 hours inspection and annual inspection in accordance with maintenance service manual and recurrent airworthiness directives.

  • Assist in Troubleshoot and repair engine discrepancies in accordance with maintenance service manual.

  • Refueling and servicing of aviation oil in all aircraft.

  • Servicing of main landing gear and nose wheel of all aircraft.

  • Marshalling of all aircraft

Aircraft Mechanic – On-the-Job Training

OMNI AVIATION CORPORATION (FLYING SCHOOL)

Omni Aviation Complex Manuel A. Roxas Highway Clark Field

Angeles City, Pampanga, Philippines

August 01, 2005 to April 30, 2007

Duties &Responsibilities

  • Perform Pre-flight inspection and engine run-up of all aircraft in accordance with maintenance service manual.

  • Assist in performing structural repair on fuselage, wings and cabin.

  • Assist in performing 25, 50, 75 & 100 hours inspection and annual inspection in accordance with maintenance service manual and recurrent airworthiness directives.

  • Assist in troubleshooting and repair engine discrepancies in accordance with maintenance service manual.

  • Refueling and servicing of aviation oil in all aircraft.

  • Servicing of main landing gear and nose wheel of all aircraft.

  • Marshaling of all aircraft

Aircraft Mechanic – On-the-Job Training

410TH MAINTENANCE WING

Clark Airbase, Philippine Airforce (Air Force City),

Angeles City, Pampanga, Philippines

April 18 to July 22, 2005

Duties & Reponsibilities

  • Assist regular mechanic in troubleshooting.

  • Assist regular mechanic in periodic & annual inspection.

  • De painting of Aircraft Parts.

  • Maintaining the cleanliness

Seminars & Training:

TOPIC : Aviation Maintenance Human Factor Training

DATE : 13 November 2012

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Engr. Melvin S. Huelgas

TOPIC : Introduction to a Quality Management System (QMS)

DATE : September 26, 2011 to September 27, 2011

VENUE : MASEZ, Pasay City, Philippines

INSTRUCTOR : Mr. Erwin N. Ferrer

TOPIC : Cessna 152 and 172 Single Engine Series Re-currency Training Course

DATE : 08 September 2011

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. Jaime C. Rider (RP-CAAP GI Lic. No. 0439)

TOPIC : Seminar on Receiving Bulk Delivery by Tank Truck

DATE : 10 August 2011

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. Raymund S. Infante

TOPIC : Basic Safety, Basic First Aid, Fire Prevention and Fire Drill

DATE : 28 April 2011

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. Leon G. Gutierrez Jr.

TOPIC : Crew Resource Management Seminar

DATE : 05 September 2009

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. Jose E. Casi

CAAP Rep. : Mr. John Michael Rey

TOPIC : CESSNA-172 Series, Re-currency Training Course Level III

DATE : 23 February 2009

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. xyz (RP-CAAP G.I. License No. 181)

TOPIC : CESSNA-172 Aircraft Familiarization and Equipment Course

DATE : 04 September 2006

VENUE : OMNI Aviation Corporation

Clark SEZ, Pampanga Philippines

INSTRUCTOR : Mr. xyz (RP-CAAP G.I. License No. 181)

I hereby certify that the above information is true and correct to the best of my ability.