Home » 2016 » October

Safety Officer Resume Sample

This post is the sample for Safety Officer. The most benefit of this post is the availability of it in almost every firm in every corner of the world. Their are several variation that the employer might be looking for when putting the post like Health Safety Officer, Hygiene Safety Officer, Fire Safety Officer hence the list is pretty long. The template for Safety officer given below can accommodate any of those resume with little alteration. As you are required with a very serious attitude and a full account of responsibility that Safety Officer might have to perform. In this field, you are suppose to show your full capability through your performance and your chance for committing mistake or your negligence is simply intolerable. You can make your work easy and comprehensive with this Daily Work Report Template.

While writing resume for the Security/Safety Officer you should provide not only your basic information but also some previous experience, credits or awards -as a proof – to show that you are an attentive, active, culpable and intelligent person. (see Security Room Operator Resume Sample, Security Officer Resume Sample for better understanding). Below we have given you an advisable resume for the post that will help you to draw a successful and attractive Safety Officer Resume Sample. In this template we have shown all your basic info, previous experiences and services, your passion to work further and attaching some previous information or credits in your resume is definitely a plus point to attract the attention of your employer.

Safety Officer Resume Template


Mobile No. : 123456789, Email ID : XXXX



Seeking the position of a Health and Safety Professional in a reputed organization where I can provide my expertise in analyzing the HSE protocols, Pro-Actively contribute and promote healthy and safe workplace in the organization.


With more than 7 years of experienced with the combined works of E.H.S, Food and Beverage. Have gained excellent knowledge in risk assessment and hazard prevention on Food contamination where I’m working at present.



WORK EXPERIENCE:(Safety Officer)

April 2010 – March 2013

Saudi Arabia (K.S.A)

Position: Safety Officer/Document Controller

Duties & Responsibilities;

  • Monitor all the Job activity at the site to ensure safety compliance.
  • Monthly Inspection program of Site equipment and Firefighting equipment to ensure safe operation.
  • Installation of safety signs, traffic control signs and other safety promotion posters to remind workers to work safely and enhance safety awareness among them.
  • Reviewing Lift Plan and Permit to work before any complex lift.
  • Verifying to confirm that all lifting equipment operators are trained, competent and certified.
  • Maintaining records of PTW’s to be available for auditing as required by company standards
  • Assist Supervisor/Foreman for the Job Safety Environment Analysis and Risk assessment for all working & practices at site
  • Prepare & Submit daily safety reports / Inspection Reports.
  • Increase and apply the awareness on health and safety levels within the organization.
  • Conducting Toolbox Talk weekly & as per Task required.
  • To record and maintain a database of all inspections conducted to follow up and identify corrective actions.
  • Managing all Commercial and Technical Document
  • Distributing Documents and ensuring Accuracy of all Documents

July 2006 – November 2009

Cebu, Philippines

Position: Safety Officer

Duties & Responsibilities;

  • Advise about prevention of injury to personnel and damage to the plant and equipment.
  • Advise about further improvements in existing working methods.
  • Report directly to the HSE Supervisor ( or as per the project org chart)
  • Inspection of work site daily for any unsafe condition and initiate for immediate corrective action, refer more complex issues to a senior HSE Personnel
  • Ensure that healthy work conditions are maintained
  • Complete and submit daily activity reports
  • Assist Sr. HSE Officer at site to conduct Safety Toolbox meeting.
  • Responsible to assist the HSE team in their duties as Pro Active in safe work environment.
  • Advise suitable standard of protective clothing and equipment.
  • Ensure that new employees Undertake HSE training and seminars to ensure complete knowledge of all elements and aspects of HSE procedures.
  • Implementing the JSA, JHA, and TBT and explained to them how important it is.

August 2005 – June 2006

Pepsi Cola Bottling Company. Cebu, Philippines

Position: Junior Safety Officer

Duties & Responsibilities;

  • Implementing Safety and Health policies and procedure.
  • Assists in risk management and hazards identification in different areas in the location.
  • Assist in Investigating and reporting of all incident, accident, injuries and hazard.
  • Monitoring OSH standard and compliance with OSH policies and procedure.
  • Assisting Sr. HSE officer in preparing materials for HSE in-house training for new employee and Conducting TOOLBOX TALK in daily basis as per rules of the management.
  • Advise and assist management in fulfilling of safety obligations & setting goals for safety matters
  • Analyzing incident and accident report.
  • Conducting Health and Safety Environment training to the new coming workers in the plant.
  • Assist in conducting monthly evacuation drill in the particular groups in order to keep them updated and to ensure they have proper knowledge regarding HSE procedure


Birthday                                        : October 07, 1976

Age                                                 : 000

Sex                                                 : Female

Marital Status                              : Single Parent

Nationality                                    : Filipino

Hobbies                                         : Mountain biking, reading, photography

 Strength and Skills:

Self-motivated, initiative and high level of energy, Strong personality, Staff supervision and ability to initiate/manage cross-functional teams, easy to deal with, Documentation and record keeping skills, high respect with everyone, Written and verbal communication skills, trustworthy, accuracy in preparing assigned task, flexible in terms of working capabilities, Proficient in MS Office Applications, Proactive in promoting Health & Safety in daily activities.

source: Safety Officer Resume Sample:

Data Typist Resume Sample

This is the age of computer. Computer is involved in almost every profession, shop, workshop, office and institute. To keep the records it is necessary for any official work to hire a typist. A data entry officer (Data Typist Resume Sample) helps in making the records. They are supposed to have high typing speed with good knowledge of basic computer languages and programs. Following (Data Typist Resume Sample) sample resume is going to help you understand how you can make an efficient Pro Cum Typist Resume without putting much effort and time to it! Make sure to mention you typing speed according to the demand of the recruiter as every company/institute may ask for a variation of typing speed. Provide recent and actual information about yourself. The resume holds all the key points to make your resume stand out among others. And finally put verified references of concerned parties to put a good image forth!

Related: Receptionist Resume Sample

Name: xyz                                                                                         Paste your pic here

Email Id: xxx

Sell No. : 000

Skype Id:xxx

Address: xxx

Country: xxx


Career Objective:

I Want To Become A Result-Oriented Person By Pursing The Goals Of Management In Ever Challenging Demanding Fields.

 Professional Experience:

  • 6 Years Pro cum Typist in Indigo Rent A Car Dubai.
  • 3 years Pro In Arab tech construction Center Dubai.

Designation:  TYPIST CUM PRO


Duties and responsibilities include but not limited to:
• Arrange visa (work permit, husband sponsored visa, visit visa etc.) for expatriates and their    family.
• Schedule staff’s visa, medical, coordinating with other internal and external departments.
• Collect all appropriate documentation necessary for visa and permits required to be processed.
• Organize visas for holiday and business related travel for managers as required.
• Responding to staff queries on Visa/ Labor/ Passport related matters.
• Ensure all visa, medical and labor permits are up to date and arrange timely renewal.
• Assist in all general inquiries concerning labor and immigration matters.
• Will provide admin support as needed.

 Academic Qualification:

  • BA- NUML University PAKISTAN

 Soft Ware Skills:

  • Adobe Photo Shop,
  • Microsoft Word, Excel Etc.
  • Power Point.

Personal Key Skills:

  • Good organization skills and team work
  • Able to work under pressure and meet deadlines.
  • Good player of football.
  • Language Known Arabic, English & Hindi.


  • Religion                                 :           xxx
  • Date &Place Of Birth           :           000
  • Sex                                         :           Male
  • Marital Status                        :           married
  • Passport no                           :           000
  • Place Of Issue                      :           Pakistan
  • VALIDITY                              :           xxx
  • Nationality                             :           Pakistani


Will be provided on demand.



Civil 3D Max Designer Engineer Resume Sample

This resume is a sample for the post of civil 3D Max Designer Engineer. An Engineer builds while a Designer Engineer creates and plans. This job is a tough one. Because it not only requires technical knowledge and experience but also Engineer’s aesthetic sense, his sense of creation and imagination. A Civil Engineer Designer faces more challenges than other Engineer fields. The resume for this field needs to be precise and descriptive. The resume is going to be your first introduction to the employer. It must manifest that you are a hard working, consistent and trustworthy person who has potential to do a lot. Make sure to enter you previous experiences and credits. Adding verified references will certainly give good impression to your resume.

Name              :     XYZ
Address          :     ABC
Contact No     :     0000
E-mail ID        :      XXXX
Gender            :     M/F

Applied For: 3D Engineer/ Designer Engineer/ Civil 3D Designer/ Civil 3D Max Engineer

Career Objective:

Willing to be in any stimulating work environment to further enhance and develop my other skills and to be able to share my knowledge and expertise in dealing with people in the industry with the embodiment of service and professionalism.

 Work Experience:

Company                    : xyz
Location                      : Dubai, UAE
Nature of Business    : Manufacturing
Inclusive Date            : November 2013 to present

Post                             : Civil  3D Max  Designer Engineer

Duties and Responsibilities:

  • Makes final sketch of proposed drawing, checking dimension of parts, materials to be used, relation of one part to another, and relation of various parts to whole structure of project.
  • Assist production operators for the completion and quality of the whole project.
  • Makes 2D and 3D model (design) of a project for the required specification of the customer.
  • Preparing Laser Drawing, PDF, and DXF of the Materials to be used for cutting procedure of the metal sheet supplier.
  • Ensure that all products are designed in accordance with customer requirements, company practice and recognized engineering standards.
  • Providing technical support for products associated with all Customer Group activities and production plant and equipment if required.
  • Develop and recommend changes if any for manufacturing processes
  • Provide technical guidance to management if required.
  • Record production details of small and large projects.
  • Resolve problems and improve manufacture ability and serviceability of products working with manufacturing and service personnel.


Company                    :  Manufacturing Industries Lt.
Location                      : (Philippines)
Nature of Business    : Manufacturer.
Inclusive Date            :  2011 – 2013

Post                              : Asst. Civil  3D Max  Designer Engineer

 Duties and Responsibilities:

  • Improved existing operations, incorporating new methods and processes such as time and motion study, job load balancing and operation sequence.
  • Planned the use of resources and scheduling activities in order to meet an objective.
  • Investigated operational problems affecting production and dealt with them in a systematic, methodical manner.
  • Perform line patrol to confirm the line operators use their safety apparels before to start the operations.
  • Conducts work observation for the standard operation of every operator using standard operation manual to ensure conformity of standard specification.
  • Lay out design of Parts and Jigs location (Assembly Line).
  • Modification and improvement of Parts setting Jigs if necessary.
  • Assure Smooth Operation of the production line.
  • Make a request of additional tools for the improvement of line assembly
  • Perform yearly Internal Quality Audit on other departments if the company comply to ISO 9001 – 2000 Standards Requirement and have preparation for External Quality Audit
  • Reviewing of standard operation’s manual of line assembly.
  • Monthly Steering reports to Production Manager of Quality records, Production Line reports, Cost Control records, Customer Complaint reports, Secondary Damage record.
  • Coordinate and support product testing during pre-production and factory introduction builds of new products.
  • Other responsibilities included: Running meetings with other team members, identifying ways to reduce production costs, managing budgets, working with engineering and other departments to produce cost estimates for new designs, liaising with research and development departments, and analyzing graphs and statistics

 Other Duties and Responsibilities:

  • Instructor of technical Motor Mechanics
  • Instructor of Metal Finishing/Bumping (Theory)
  • Assists suppliers for their sample product (Nippon Paint, Du Pont, BASF, Custom Classics (Cladding), Clarion, and 3M).

Seminars / Workshops:

  • Auto CAD Training
  • Nissan Production Way Training
  • Making Of Standard Operation Sequence
  • Production Planning & Control
  • Industrial Engineering Tools
  • Vehicle Appreciation (VES)
  • ISO 9001-2000 Training
  • Danger Prediction Training
  • Total Preventive Maintenance

 Key Skills:

Computer Literate:

MS Office (Word, Power Point, Excel)
Auto CAD 2D /3D Modeling, Co Create 3D Modeling(Pro-E)
Basic Adobe Photoshop.
Machining Operation:

Lathe, Shaper, Milling
A/C Repair/Installation

Educational Background:

 Bachelor of Science in Mechanical Engineering

 Personal Data:

Nationality      : Filipino
Birth date       : DD/MM/YYYY
Birthplace       : Philippines
Civil Status     : Single
Visa Status    : Employment Visa (Transferable)


Senior Data Entry Resume Sample

Following resume is a sample for the post of Senior Data Entry Resume. A Data Entry officer is primarily required in every field. It is his responsibility to collect, organize and keep the data error-proof. For any job a good resume is the first and most important document. You are required to put forth your best. Your resume must entail your working expertise, your up-to-date knowledge and your capability of arranging and managing large and hectic tasks like Data entry accountant Resume. Your code of character is really demanded here because for larger firms and organizations, they require a trustworthy person more than an honest one. Make sure to highlight that as a Data Entry Officer you are an active and versatile person with a plus of quick learning and that you appreciate the team spirit and can improvise easily. Finally adding verified references to your resume is definitely going to make your mark.

Personal Information:-

Noreen Akhtar

Father Name:-      

NIC #:                   

Contact No:-        

          House # 6. Near Novelty Bridge,

          Main Road, Samanabad, Faisalabad.


  • A high energy enthusiastic and dependable individual who exceeds in challenging Competitive environments.
  • Ability to effectively manage multiple responsibilities simultaneously.
  • Positive and confident personality blended with a strong work ethic.
  • Ability to deal with pressure situation in a logical and professional manner.

Career Objectives:-

Seeking a position to utilize my potential knowledge and skills to almost level towards and Organization’s growth.

Academic Qualification:-

 Matriculation                                             2nd Division

 I.C.S                                                              1st Division

 B.A                                                                1st Division

Computer Courses:-

  1. Computer Added Landscape Designing Diploma from Agriculture University Faisalabad.
  2. Import Export Documentation and Office Management in Soft & Hard files from VTI Faisalabad.

Computer Skills:-

  • Operating System: Windows 2007, Windows XP Professional.
  • Installing Windows XP Professional & Programming.
  • Microsoft Word, Excel, Power Point, Access.
  • In Page Designing (Urdu Composing).
  • Coral, Adobe Shop, Movie making, converting and designing.
  • Internet Exploring & Web searching.


  • English
  • Urdu
  • Punjabi

Professional Experience:-

  1. Six months Experience Faisal Enterprises Faisalabad.
  2. Six Months as an “Office Management & Computer Working” in State Lift Insurance Corporation.
  3. One year as a “Computer Operator” in Water And Sanitation Agency, Faisalabad.
  4. Two year as a “Computer Operator” in Faisalabad Development Authority, Faisalabad.
  5. January 2012 to till on wards working as a “Computer Operator” in Kamil Foundation School Jinnah Colony, Faisalabad. (Morning Time) & August 2012 to till on wards as office management “Chiniot Dialysis Center & Excellent” Jinnah Colony Faisalabad. (Evening Time)


Internet Exploring.

Book Reading related to computer.

Computer Working.


Will be furnished on request.